Driveway Cleaning in Brisbane.
A clean driveway is the fastest visible facelift a Brisbane property can get, and it's one of our highest-turnaround jobs. Brisbane's storms wash clay and organic matter across concrete and aggregate, while shaded entries green over with algae that gets slippery through the wet months. We use a rotary surface cleaner for an even, line-free finish and treat oil and tyre stains separately with a degreaser pre-treatment.
Concrete and pavers take full pressure; exposed aggregate and decorative finishes are cleaned at a dialled-back pressure to avoid dislodging stones. Most Brisbane driveway cleans are done in a few hours and quoted in writing within 24 business hours.
What makes Brisbane exteriors different to clean?
Brisbane sits in a humid subtropical climate zone (Köppen Cfa). Summer humidity above 70%, frequent thunderstorms from October to March and year-round warmth combine to create the perfect environment for mould, algae and lichen. Rendered walls, painted weatherboard and concrete tile roofs all develop visible biological growth within 12–18 months without intervention — faster on shaded southern aspects and properties under heavy tree cover. Pressure alone doesn't fix this; the surface looks clean for a few months and the spores grow back. Soft washing kills the growth at the spore level so the regrowth interval is years, not months.
How we approach driveway cleaning in Brisbane.
- 01
Stain pre-treatment
Oil, rust and tyre stains are degreaser-treated and dwelled before the main pass.
- 02
Surface cleaner pass
Rotary surface cleaner runs in overlapping strips for even pressure — no zebra striping, no missed lines.
- 03
Edge detail
Wand-detail along edges, expansion joints, around drains and against walls.
- 04
Final rinse
Run-off is rinsed off the property and into the street drain.
- 05
Optional joint re-sand (pavers)
If you've booked re-sanding, dry sand is brushed into the joints after the surface dries.
What this service covers.
Broom-finish concrete
3,000–4,000 PSI surface cleaner pass.
Exposed aggregate
Lower pressure (2,000–2,500 PSI), wider tip — protects the stone.
Pavers
Pressure clean + optional joint re-sanding.
Stamped or coloured concrete
Lower pressure to preserve colour layer; chemical-led approach.
Driveway Cleaning across Brisbane.
- New Farm
- Teneriffe
- Hamilton
- Ascot
- Bulimba
- Paddington
- Toowong
- Indooroopilly
- Chelmer
- Graceville
- Wilston
- Clayfield
- Hendra
- Newstead
- Bardon
- Auchenflower
- Kenmore
- Carindale
- Holland Park
- Wynnum
- + surrounding suburbs
Driveway Cleaning in Brisbane, answered.
How much does driveway cleaning cost in Brisbane?
Most standard Brisbane driveways sit in the low hundreds, with size, surface type and stain load setting the price — oil and rust treatment adds to it. We use a surface cleaner for an even result and confirm a fixed price in writing first.
Can you get the green algae off my shaded driveway?
Yes, and we treat it rather than just blasting it — algae that's only rinsed off the surface regrows fast in Brisbane's humidity. A treatment step kills it at the root so the entry stays clean and non-slip for much longer.
Do you clean exposed aggregate driveways?
Yes, at the correct lower pressure. Aggregate and decorative concrete need a surface cleaner and a gentler setting so stones aren't dislodged — full wand pressure in one spot can pit the finish. We match the method to the surface.
Will the driveway look brand new?
Closer to brand new than you'd expect. Most concrete driveways come up looking 90–95% of new. Deep oil that has soaked into porous concrete for years may leave a faint shadow — we'll tell you on the quote whether to expect a complete clean or a 90% lift.
How long does a driveway clean take?
A standard residential driveway is 1.5–3 hours. Long, double-width or commercial driveways take longer; the quote will give you a time estimate.
Should I seal my driveway?
Sealing isn't required, but it's worth doing on exposed aggregate, on workshop driveways with frequent oil exposure, and on stamped or coloured concrete where you want to lock in the colour. We'll point you to a sealer-specialist after the clean — sealing onto wet or dirty concrete defeats the purpose.
Will my plants be okay?
Yes. We pre-water and tarp adjacent garden beds and flush the soil after we finish. The detergent we use is rated safe for residential landscaping at the dilution we apply.
Do you clean concrete cracks?
Cracks come up cleaner along with the surface, but they don't disappear. If you want crack repair before sealing, mention it on the quote and we'll refer a concrete specialist.
A fixed price, no hidden fees.
Quick and simple. No pushy follow-ups, no hidden fees, no phone call unless you ask for one.